Passiv

Associate an installation

1

From the Passiv Programmer

Recommended

Open the Installer menu on the Passiv Programmer by pressing the up and down buttons at the same time.

Select Set Partner ID and enter your 3-digit Partner ID. The installation will appear in the Passiv Portal once it is connected to the internet.

2

From the Passiv Portal

Find the Hub ID of an installed Passiv Smart Thermostat. This is printed on the back of the Passiv Hub or can be found under Settings > About on the Passiv Programmer.

In the Passiv Portal, go to Systems > Associate System and enter the Hub ID.

Only Admins can add installations through the Passiv Portal. The installation must also be connected to the internet.

3

Using this toolkit